Power supply | 220 - 240VAC, 50/60Hz, 24VDC | |
Consumption | Less than 38W | |
Frequency response | 20Hz - 20kHz (relative level @ 1kHz ±3 dB) | |
Signal to Noise Ratio | > 80dB | |
Harmonic distortion rate (THD) | < 0,02% | |
Gain adjustment per channel | -75dB ~ -0dB, about 0.4dB per 1 step | |
DSP audio processing | 48 kHz, 32-bit CAN/CNA converters - DSP (294 MIPS) | |
Virtual MATRIX | 640 x 1024 | |
Audio inputs | MIC / PHANTOM MIC / LINE (1 ~ 8, Euroblock 3pins)
Switchable 0 dBV 10 kΩ (LINE) / -60 dBV 600 Ω balanced (MIC) (with 24 VDC Phantom power supply) | |
Audio outputs | AUDIO OUT (1 ~ 8) +10dBV (balanced) Monitor 0dBV (balanced) | |
Ethernet (LAN) | RJ45, TCP/IP protocol 10/100/1000 Base-T | |
Extension (LAN) | Output to EVAMATRIX on RJ45 (Dante®) - Input from EVAMATRIX on RJ45 (Dante®) CAT5 cable Maximum distance: 100m | |
PTT microphone | Supervised, 5-pin DIN connector | |
UGA inputs | Inputs UGA 1 ~ 5: Triggering on a voltage
Min/Max trigger voltage ALARM/ALERT: 21VDC to 60VDC UGA supervision: -3VDC + 3VDC | |
Dry contact inputs | Inputs 1 ~ 8
10 kΩ : in triggering 20 kΩ : in supervision
Open or short-circuited: connection fault | REMOTE MESSAGE:
1 ~ 8 short-circuit triggerable |
Dry contact outputs | Outputs 1 ~ 16 : relay outputs | |
Synthesis output | Dry contact outputs 1 ~ 5 : relay output | |
Protections | Current protection, temperature protection, voltage protection... | |
MTTF availability | Average failure time greater than 100,000 hours | |
MTTR availability | Average repair time less than 20 minutes | |
DC input power supply | 24VDC | |
Touch screen | 5’’LCD | |
Operating temperature | -10°C ~ +40°C - Humidity: 5 ~ 95% | |
Weight | 4,5kg | |
Dimensions (WxHxD) | 482 x 88 x 280 mm (2U 19“) | |
Accessories | 2x Micro SD / 1x SD Card / Euroblock Connectors / AC Power Cord / Micro PTT Cable / Screws / User Manual | |
Protocol and security encryption | TCP/IP, Http, Https, SNMP V2c, IPv4, TLS1.2, SHA256, SSL, AES-256, Elliptic curve cryptography | |